About Us






Contact us


6x6 Frontier 650
8x8 Frontier EFI
8x8 Avenger 750 EFI
Argo Accessories
Secondhand Units
Service Agents
Links and Users




Optional Convertible top, ROPS & Rubber Tracks
(Avenger model shown)

  1. Convertible top
    Protects the occupants from the weather. Has removable side and rear doors, and stores folded down with boot cover. Requires windshield. (Optional driving light assembly cannot be used with full convertible top.
  2. Rear Bench Seat Assembly
    For 8x8 models only. The rear bench seat with back rest features versatile forward or rear facing position for easy entry / exit when the vehicle is equipped with a convertible top. The seat is more comfortable due to greater foam thickness and density.
  3. Rubber Tracks
    Lightweight and durable construction, combined with low rolling resistance to ensure smooth, quiet operation in most difficult terrain conditions. The 18" track width ensures optimum flotation and minimal ground pressure while the tread design offers exceptional traction on various hard and soft surfaces.

    SuperTrack Assembly
    18" (45.5cm) wide segments go over ARGO tyres, to provide optimum flotation over deep snow.

    Super Track Ice Cleat Assembly (not shown)
    Steel cleats increase traction on ice and hardpacked snow.

    Standard Track Assembly
    13" (32.5cm) wide segments go over ARGO tyres, reducing ground pressure for travel over snow or flooded areas

  4. Brushguard Assembly
    Protects the winch and headlights from Damage by the brush encountered along the trail. Installation of mounting assembly or power winch assembly is required. The Avenger Brushguard features an integrated tow hook. (model shown)
  5. Power Winch Assembly
    For vehicle recovery or to raise and lower plow blade. 3000lbs (1364kg) capacity, reversing with freewheeling out, 40' cable with 30' (9M) nylon strap. Safety switch disables winch unless ignition is on.

Rear Receiver Winch Assembly
This bracket mounts into the Avenger/Frontier 8x8 trailer hitch receiver, extending the versatility of your winch. Includes instructions and wire harness for installation


Wireless Winch Remote Control Assembly
Wireless and compact, this unit can control remote use of winch from a location of up to 150' for added convenience and versatility





Fold-down Windshield
Laminated safety glass in an aluminium frame features mounting hole for the optional windshield wiper assembly.

Windshield Wiper Assembly
Complete with everything needed to assemble and fit to your ARGO Windshield. The Wiper Motor mounts quickly and easily, requiring no drilling on newer style predrilled windshields.

Heater Assembly (Avenger models)
Automotive atyle hot coolant heater with 2-speed fan to defrost windshield and heat passenger compartment.

Handrail Assembly
Tubular steel rails mount around the body, providing hand-hold points for rear passengers.

Bilge Pump Assembly
Recommended for amphibious use of any ARGO. Operated by a dash mounted switch, the pump quickly removes water from the lower body

Roll Bar Assembly
Adds a distinctive look. Protects driver and passenger. (Reduces seating capacity to 2) Comes with two seat belts and fits all 6x6 models.

Roll Bar Light Assembly
Two rubber mounted, shock resistant 3" x 5" weatherproof lamps, easily installed on your existing roll bar assembly.

Rollover Protection Structure (ROPS)
Powder coated tubular steel frame provides rollover protection and seat belts for driver and front seat passenger.

ROPS & Rear Bench Seat Assembly
Protects the driver, front seat passenger and two rear passengers by using the rollover protection structure. Includes rear bench seat and four seat belts.

Outboard Motor Bracket
This one-piece bracket mounts at the bumper and onto the trailer hitch bracket. Mounting location is slightly off-centre and it accepts an outboard motor of up to 9.9hp for increased propulsion in the water. Frontier 480 and 580 require hitch.

Skid Plate Assembly
Formed from black polyethylene to protect lower body.

Cargo Tie-Down Assembly (not shown)
Six rings mount around the rear compartment.

Tow Hook Assembly
An attachment point for front or rear.

                          Brake/Tail Light  Assembly
Comprised of two "JW Speaker" Brake / Tail lights, complete wire harness and all necessary mounting hardware.

Storage Covers
Black, weathertight material secures in place under ARGO bumper. Fits all production models without roll bar or ROPS.

Utility Bracket Assembly
The Utility Bracket Assembly Consists of two "Rugged Gear" utility hooks and barrel holder. It is an ideal way to safely secure objects such as shovels, fishing rods, paddles, etc. to the outside or inside of your ARGO.


Utility Rack Assembly
The Utility Rack Assembly is comprised of two formed flatbar brackets, four "Rugged Gear" utility hooks and all mounting hardware necessary to attach the bracket to the backrest handrail and upper body. The rack assembly allows two rifles or shotguns to be carried on the inside of the vehicle.

Utility Storage Pouch
Domes attach to back rest for convenient extra atorage space.

81 in. (2 m) wide steel blade features multi-angle positions. Attaches to front bearing extension housings. Requires power winch.